Clarity INT9 A/D Guide de l'utilisateur télécharger pdf (Page 10)

Clarity - Getting Started Installation

2.2.1 Hardware key (dongle) installation

The hardware key needs to be installed and

present

in the PC when using the Clarity

Chromatography Station.

The drivers will automatically be installed

during Clarity software installation. If the

installation did not proceed automatically

(older versions of MS Windows), refer to the

chapter 7.4 - Hardware key on pg. 57.

Caution! Install Clarity software from the CD ROM first

and only then insert the key into the PC.

When you have the Sentinel hardware key,

refer to chapter 7.4.3.

Printer port hardware key (dongle)

Plug the hard lock in the printer port between

the printer port and any potential printer.

2.2.2 The INT7 Card

In Windows 2000/XP/Vista the drivers will be

installed automatically

during the installation

of the Clarity software. Install the software

before attaching the device to PCI slot.

Caution! Install the Clarity before inserting any devices

(INT7, U-PAD, etc.).

• Turn off the PC

• Insert the INT7 card into the PCI slot

• Start up the PC

a) MS Windows 2000/XP and later

In Windows 2000/XP/Vista the drivers were

installed automatically

during the installation

of the Clarity software.

b) Previous versions of MS Windows

In other systems then Windows

2000/XP/Vista follow the procedure described

in the separate INT7 manual.

• The driver is now installed, proceed to setup

and wiring.

Note: When installing multiple INT7 cards, a PC restart

is recommended after the installation of each card,

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Pas de commentaire

Clarity INT9 A/D Guide de l'utilisateur Page 10