Clarity W-1000 Manuel d'utilisateur télécharger pdf (Page 26)

Operation26

English

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an

option for setting up password security. The password can be set through the On-Screen

Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the

menus" on page 25.

You will be inconvenienced if you activate the power-on lock functionality and subsequently

forget the password. Print out this manual (if necessary) and write the password you used in

this manual, and keep the manual in a safe place for later recall.

Setting a password

Once a password has been set, the projector cannot be used unless the correct password is

entered every time the projector is started.

1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings

menu. Press MODE/ENTER. The Security Settings page displays.

2. Highlight Power on Lock and select On by pressing / .

3. As pictured to the right, the four arrow keys ( ,

, , ) respectively represent 4 digits (1, 2,

3, 4). According to the password you desire to set,

press the arrow keys to enter five digits for the

password.

4. Confirm the new password by re-entering the

new password.

Once the password is set, the OSD menu returns

to the Security Settings page.

5. To activate the Power on Lock function, press / to highlight Power on Lock and

press / to select On.

The digits being input will display as asterisks on-screen. Write your selected password down

here in this manual in advance or right after the password is entered so that it is available to

you should you ever forget it.

Password: __ __ __ __ __

Keep this manual in a safe place.

6. To leave the OSD menu, press MENU/EXIT.

If you forget the password

If the password function is activated, you will be asked

to enter the five-digit password every time you turn on

the projector. If you enter the wrong password, the

password error message as pictured to the right displays

lasting for three seconds, and the message 'INPUT

PASSWORD' follows. You can retry by entering another

five-digit password, or if you did not record the

password in this manual, and you absolutely do not remember it, you can use the password

recall procedure. See "Entering the password recall procedure" on page 27 for details.

If you enter an incorrect password 5 times in succession, the projector will automatically

shut down in a short time.

INPUT NEW PASSWORD

BackMENU

Power On Lock and Splash Screen Lock

use the same password

Password Error

Please try again.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Clarity W-1000 Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données Clarity W-1000